JL-Audio Fathom IWSv2-SYS-213
+43 1 6982317 +
Produktberatung per E-Mail +
Installations- und Lieferservice +
Hilfestellung bei Garantieabwicklung +
mehr als 20 Jahre Erfahrung +
The same minds that engineered JL Audio’s reference-grade Fathom® and Gotham® powered subwoofers have created an amazing in-wall subwoofer solution, centered on an innovative, thin-line driver with groundbreaking technologies.
Housing this exotic driver is a critically engineered enclosure with a unique floating mount design to minimize wall excitation. The enclosure features extensive architectural features aimed at improving rigidity while keeping a very low profile and minimal wall thickness.
A paintable, fine steel-mesh grille, also designed to control vibration, is included for each enclosure in a system.
The IWSv2-SYS-113 is driven by a rack-mountable, purpose-tuned amplifier, capable of delivering up to 1 kW of clean power, and armed with serious processing features, including our acclaimed Digital Automatic Room Optimization system.
There is no need to lower your expectations when selecting this remarkable in-wall solution... it's a real Fathom®.
The IWSv2-SYS-113 is available to fit a variety of 2" x 4" and 2" x 6" wall studs. Consult your Authorized JL Audio Dealer for specific application information.
Enclosure Finish: Flat Black (hidden from view when installed)
Grille finish: Primer White (paintable)
Enclosure Construction: CNC-Cut Birch Plywood
| Enclosure Type: | Sealed |
| Enclosure Finish: | Black Texture-Coated |
| Frequency Response (Anechoic): | 26 Hz - 101 Hz (± 1.5 dB); -3dB at 25 Hz / 112 Hz; -10dB at 22 Hz / 150 Hz |
| Effective Piston Area (Sd): | 98.26 sq in / 0.0634 sq m |
| Effective Displacement: | 147.3 cu in / 2.41 L |
| Amplifier Power: | 1000 W RMS short-term |
| Power Mode(s): | Off, On or Automatic (Signal-Sensing) |
| Light Modes: | Off, On or Dim |
| Unbalanced Inputs: | Stereo or Mono (two RCA jacks) |
| Balanced Inputs: | Stereo or Mono (two female XLR jacks) |
| Speaker/High-Level Inputs: | N/A |
| Input Grounding: | Isolated or Grounded |
| Input Modes: | Master or Slave |
| Level Control: | Reference (fixed gain) or Variable, from full mute to +15dB over reference gain |
| Filter Mode(s): | Low-Pass |
| Filter Slope(s): | 12/24 dB/octave |
| Filter Frequency Range: | 30 Hz - 130 Hz |
| Filter Defeat Function: | Yes |
| Polarity: | 0 or 180 degrees |
| Phase: | Variable, 0- 270 degrees, referenced to 80 Hz |
| Extreme Low Frequency (E.L.F.) Trim: | Variable, -12 dB to +3 dB at 23 Hz |
| Line Outputs: | N/A |
| Output to Slave: | Balanced (one male XLR jack) |
| Calibration Mode: | Digital Automatic Room Optimization (D.A.R.O.), includes laboratory-grade microphone |
| Wall Cavity Width (W): | Minimum: 14.375 in / 365 mm Maximum: 14.875 in / 378 mm |
| Wall Cavity Height (H): | Minimum: 93.625 in / 2,378 mm |
| Width (W): | 13.75 in / 349 mm |
| Height (H): | 70 in / 1,778 mm |
| Depth (D): | 2.94 in / 75 mm |
| Wall Cavity Width (W): | Minimum: 14.375 in / 365 mm Maximum: 14.875 in / 378 mm |
| Wall Cavity Height (H): | 93.625 in / 2,378 mm |
| Width (W): | 13.75 in / 349 mm |
| Height (H): | 55 in / 1,397 mm |
| Depth (D): | 4.70 in / 119 mm |
| Width (W): | 17.4 in / 442 mm |
| Height (H): | 3.5 in / 89 mm |
| Depth (D): | 17.9 in / 455 mm |
| Net Weight: | 35 lb / 15.9 kg |
| Grille Height (H): | 17.64 in / 448 mm |
| Grille Width (W): | 17.14 in / 435 mm |
| Wall Opening Height (H): | 16.50 in / 419 mm |
| Wall Opening Width (W): | 16.00 in / 406 mm; |